Copyright © 10/10/11 Marvell
Doc. No. MV-S400358-00 Rev. -
October 10, 2011
Page 5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
When separated, attaching the face plates to each of the separated units is recommended. The
printed arrows refer to the direction in which the Main Unit or the AC/DC adapter is to be moved, not
the cover.
1.2
D2Plug Interfaces
Except for power, all the interfaces are located on the sides of the Main Unit, as shown in Figure 5
and Figure 6.
The left-hand side plate has two USB Type-A Host connectors, 15-pin Type-D Connector for VGA
output, an RJ-45 Connector with dual LED, and a micro-B USB Device Connector for console
interface. The console interface connects to the UART port of the PXA510 SoC through an internal
USB to UART device (Prolific PL2303 from www.prolific.com.tw).
Figure 4: Inserting Protective Cover Plates
Figure 5: Connectors on Left-Hand Side
Interface
