PXA510 D2Plug
Quick Start Guide
Doc. No. MV-S400358-00 Rev. -
Copyright © 10/10/11 Marvell
Page 10
October 10, 2011
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
2
Interactions
To get the interactions started with the D2Plug, familiarize yourself with both console and GUI. This
portion of the Quick Start Guide provides an overview of such interactions.
2.1
Console
1. Connect Windows PC host to the USB “Console” micro-B Connector using provided cable. The
host PC will indicate “new hardware”, even when D2Plug is not powered.
2. Install PL2303 driver and it will recognize the USB to UART converter. Under Device Manager
-->Ports (COMM and LPT), users will see “Prolific USB-to-Serial Comm Port (COMn), where
n=assigned COM port
a) Open “Properties” for the said device (right click-->Properties)
b) Under the “Port Settings” tab, set the value to match.
To change the COM port setting, click on the “Advanced” button and select the COM port number.
Figure 12: Properties of Prolific USB to Serial Comm Port
