Marvel MV01-5000-00 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 47

Marvel MV01-5000-00 Скачать руководство пользователя страница 34

32

MV01-94000-00
Rev C

b.

7.

Re-measure the center of gravity.

8.

WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against
vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed
with hand tools. Tighten the four bolts attaching

the shock to the tracks

on the

seat section. (Tighten to six newton meters (Nm) or five foot pounds). Failure to
heed these warnings could cause damage to your wheelchair, injury to yourself, a
fall, a tip-over and/or loss of control, causing severe injury to yourself or others.

9.

WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against
vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed
with hand tools. Tighten the four bolts attaching

the frame to the tracks

on the

seat section. (Tighten to six newton meters (Nm) or five foot pounds). Failure to
heed these warnings could cause damage to your wheelchair, injury to yourself, a
fall, a tip-over and/or loss of control, causing severe injury to yourself or others.

Adjusting Seat Angle (Dump)

1.

Using a 5mm Allen Wrench (Key), loosen, but do not remove, the four bolts (two on
each side) attaching the shock to the tracks on the seat section.

«
...
32
33
34
35
36
...
»

Содержание MV01-5000-00
















































Отзывы:

Нет отзывов