manualshive.com logo in svg

Marvel MV01-5000-00, Руководство по эксплуатации, Страница: 26 / 47

Поделиться
Скачать
Marvel MV01-5000-00 Скачать руководство пользователя страница 26

24

MV01-94000-00
Rev C

 

Adjusting the Shock

1.

 

A good starting for point is to set the air pressure equal to the 80% to 100% of
rider’s weight.  For example, if the rider weight is 135 pounds, set the air pressure to
between 108 and 135 PSI.  You will need a shock adjustment pump to change
pressure.  Our wheelchairs will come pre-set to 150 PSI if not specified.

2.

 

WARNING: Always maintain pressure in shock within 20% PSI of rider’s weight.
Failure to heed these warnings could cause damage to your wheelchair, injury to
yourself, a fall, a tip-over and/or loss of control, causing severe injury to yourself or
others.

3.

 

To lockout the shock, toggle the Blue Power Valve lever to the “closed” position. To
engage the shock, toggle the Blue Power Valve lever to the “open” position.  Any
position in between “open” and “close” provides an infinite range of options.

4.

 

Refer to appropriate Shock adjustment user’s manual for all other adjustments .

Adjusting and/or tapering the wheelchair width and extending camber tube

1.

 

Rider must be out of the wheelchair.

Содержание MV01-5000-00
















































Отзывы:

Нет отзывов