Marvel MS15RA Скачать руководство пользователя страница 14

14

COMMERCIAL PRODUCT WARRANTY

Marvel Refrigeration Limited Warranty

REGISTER YOUR PRODUCT

To register your product in our warranty system submit online at marvelrefrigeration.com. Keep your receipt, delivery slip, or some other 

appropriate payment record to establish the warranty period should service be required.  If service is performed, it is in your best inter-

est to obtain and keep all receipts.  

1-YEAR LIMITED PARTS AND LABOR WARRANTY

For one year from the date of original purchase, this Marvel product warranty covers all parts and labor to repair or replace any part of 

the product that proves to be defective in materials or workmanship. For products installed and used for normal residential use, material 

cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase. All service provided 

by Marvel under the above warranty must be performed by Marvel factory authorized service, unless otherwise specified by Marvel. 

Service provided during normal business hours.

LIMITED 5-YEAR SEALED SYSTEM WARRANTY

For five years from the date of original purchase, Marvel will repair or replace the following parts, labor not included, that prove to be 

defective in materials or workmanship: compressor, condenser, evaporator, drier, and all connecting tubing. All service provided by Mar-

vel under the above warranty must be performed by Marvel factory authorized service, unless otherwise specified by Marvel. Service 

provided during normal business hours.  

WARRANTY TERMS

These warranties apply only to products installed in any one of the fifty states of the United States, the District of Columbia, or the ten 

provinces of Canada. The warranties do not cover any parts or labor to correct any defect caused by negligence, accident or improper 

use, maintenance, installation, service, repair, acts of God, fire, flood or other natural disasters. The product must be installed, oper-

ated, and maintained in accordance with the Marvel User Guide. 

The remedies described above for each warranty are the only ones that Marvel will provide, either under these warranties or under any 

warranty arising by operation of law. Marvel will not be responsible for any consequential or incidental damages arising from the breach 

of these warranties or any other warranty, whether express, implied, or statutory. Some states do not allow the exclusion or limitation 

of incidental or consequential damages, so the above limitation or exclusion may not apply to you. These warranties give you specific 

legal rights, and you may also have other rights which vary from state to state. 

Any warranty that may be implied in connection with your purchase or use of the product, including any warranty of merchantability 

or any warranty fit for a particular purpose is limited to the duration of these warranties, and only extends to five years in duration for 

the parts described in the section related to the five year limited warranty above. Some states do not allow limitations on how long an 

implied warranty lasts, so the above limitations may not apply to you. 

• 

The warranties only apply to the original purchaser and are non-transferable.

• 

These warranties cover products installed and used for normal residential use only.

• 

The warranties apply to units operated outside only if designed for outdoor use by model and serial number.

• 

Replacement water filters, light bulbs, and other consumable parts are not covered by these warranties.

• 

The start of Marvel’s obligation is limited to four years after the shipment date from Marvel.

• 

In-home instruction on how to use your product is not covered by these warranties.

• 

Food, beverage, and medicine loss are not covered by these warranties.

• 

If the product is located in an area where Marvel factory authorized service is not available, you may be responsible for   

                a trip charge or you may be required to bring the product to a Marvel factory authorized service location at your own cost 

                and expense.

• 

Units purchased after use as floor displays, and/or certified reconditioned units, are covered by the limited one year

                warranty only and no coverage is provided for cosmetic defects.

• 

Signal issues related to Wi-Fi connectivity are not covered by these warranties.

For parts and service assistance, or to find Marvel factory authorized service near you, contact Marvel Refrigeration:    

 MarvelRefrigeration.com • [email protected] • +1.800.223.3900

1260 E. Van Deinse St., Greenville, MI  48838

Содержание MS15RA

































Отзывы: