10
Shelving
The unit is shipped with the (2) shelves taped in place in
the upper and the lower shelf positions. Remove them from
the refrigerator and arrange them as follows when setting
up your unit.
If you are not serving beer on tap, your keg dispenser can
be used as a refrigerator by placing both shelves on the
mounting brackets as shown in Figure 17. The shelves are
marked upper and lower, The upper shelf should be placed
in the top shelf position and the shelf marked lower should
be placed in the bottom shelf position.
Stored upper and
lower shelves
on side
Two shelves
installed
Figure 16
If you are using a quarter barrel of beer, you can add shelf
space for keeping your mugs chilled. The quarter barrel
must set on the floor, it cannot fit on the shelf, see
Figure 18. Be sure the white floor plate is in the bottom of
the interior compartment before positioning the barrel.
Figure 18
Half barrel (keg)
Installed upper
shelf above
barrel
Figure 17
Quarter barrel
Figure 19
If you are using a half barrel (keg) or (2) 1/6 barrels, place
the two shelves on the right side of the keg dispenser on
the two mounting hooks for storage. (See Figure 19). Be
sure the white floor plate is in the bottom of the interior
compartment before positioning the barrel(s).
Two shelves
White floor plate
White floor plate
USING YOUR BEER DISPENSER
Stored lower shelf
If you are using the appliance as a refrigerator for per-
ishable foods, the set-point temperature should be set
between 34°F and 42° F (1.2° C and 5.7° C).
!
CAUTION