background image

ELECTRICAL

NOTE

Electrical Shock Hazard

•  Do not use an extension cord with this appliance. 

They can be hazardous and can degrade product 

performance.

•  This appliance should not, under any circum-

stances, be installed to an un-grounded electrical 

supply. Do not remove the grounding prong from 

the power cord. 

•  Do not use an adapter.

•  Do not splash or spray water from a hose on 

the appliance. Doing so may cause an electrical 

shock, which may result in severe injury or death. 

!

WARNING

Ground Fault Circuit Interrupters (GFCI) are prone to nui-

sance tripping which will cause the appliance to shut down. 

GFCI’s are generally not used on circuits with power equip-

ment that must run unattended for long periods of time, un-

less required to meet local building codes and ordinances. 

Electrical Connection

A grounded 115 volt, 15 amp dedicated circuit is required. 

This product is factory equipped with a power supply 

cord that has a three-pronged, grounded plug. It must be 

plugged into a mating grounding type receptacle in accor-

dance with the National Electrical Code and applicable 

local codes and ordinances. If the circuit does not have a 

grounding type receptacle, it is the responsibility and obli-

gation of the customer to provide the proper power supply. 

The third-ground prong should not, under any circumstanc-

es, be cut or removed. 

Do not remove 

ground prong

6

Содержание MLCL215





































Отзывы: