USING YOUR ELECTRONIC CONTROL
Control Function Guide
Function
Command
Notes
ON/OFF
Press and release.
Unit will immediately turn ON or OFF.
Enable Sabbath Mode
Press and hold for 5 seconds and release.
The oF / o
C symbol will flash briefly after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate.
Disable Sabbath Mode
Press and release.
Display and interior light return to normal operation.
Silent Mode (ice production
suspended for 3 hours)
Hold and .
Display will count down the hours:
Clean Mode
See "Cleaning" section
Showroom Mode
Hold and for 5 seconds.
The oF / o
C symbol will flash. Display will be lit and interior light
will function.
Unit will not cool.
Repeat command to return to
normal operation.
Door Alert Notification
When the door is left open for more than 30 minutes:
•
A tone will sound for several seconds every minute
•
will appear in display
•
Close door to silence alert and reset
Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing
towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Marvel recommends allowing the unit to reach set points before
loading.
NOTE
Electronic control
First Use
Initial startup requires no adjustments. When plugged in, the unit will
begin operating under the factory default settings. If the unit was turned off
during installation, simply press and the unit will immediately switch on.
To turn the unit off, press .
11
