12
SHELVING CONFIGURATION ML24WSG
Insert Wine Bottles
The four (4) pull-out shelves each hold eight (8) bottles.
See Figure 16 for typical wine bottle spacing. Care should
be taken when storing extra tall bottles in the wine cradle at
the bottom of the compartment because they may prevent
the door from closing.
Loading Tips and Suggestions
Two (2) magnums can be placed in the bottle cradle as
long as they are positioned horizontally.
The bottles on the top rack directly under the light will be
exposed to a slightly higher temperature when the light is
on. Position your wines accordingly and REMEMBER TO
TURN OFF THE LIGHT WHEN IT IS NO LONGER NEED-
ED.
Keep wines that you plan to use for everyday drinking and
entertaining on the front half of the racks where labels are
completely visible. Place wines for aging or longer term
storing in the rear.
Pull-out Racks
The four (4) pull-out wine racks may be pulled out approxi
-
mately seven and a half (7.5) inches to facilitate adding or
removing bottles. DO NOT lean on or press down heavily
on the wine shelves. Doing so may damage the shelves
and the wine bottles stored on them. Pull the wine racks
out gently and carefully to minimize unsettling your wine
collection. Avoid pulling out more than one rack at any time
to maintain stability.
Single Bottle Racks
The single level roll out racks allow you to easily view and
access your inventory without disturbing other bottles (see
Figure 18).
Figure 17
Figure 18
Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 16
