11
MACR214
1. Turn off water supply and disconnect electrical supply
product prior to attempting installation.
2. Remove the grille and access panel (if equipped) along
with the back panel.
3. Locate water valve in the front
of the unit and thread water supply
line through.
Route the water supply line through the unit so it does
not come into contact with any internal components
other than the solenoid valve. Normal operation creates
some vibration. A water supply line contacting an internal
component or cabinet wall can cause excessive noise
during operation or damage to the line.
4. On the back panel, break
away filler feature in bushing
with flat screwdriver.
5. Thread water line through back
panel hole (with bushing).
6. Locate water valve inlet and
connect to valve.
7. Reinstall the grille and access
panel (if equipped) along with the
back panel.
8.. Install retaining clip.
INSTALLING THE WATER SUPPLY
Figure 14
NOTE
Figure 15
Figure 16
Figure 17