Start Your Appliance
Your appliance will start upon initial plug-in. The LED will
flash amber upon initial plug-in due to your unit being
powered-on at the factory to verify performance and then
powered-off. The
Sentry System
™ refrigeration monitor
senses a power outage has occurred and relays this infor-
mation to you when you initially power-up your appliance.
This is normal and pressing the “ON/OFF” button will reset
this alarm function.
If your appliance’s control has been shut-off (i.e., unit
plugged in, interior lights operate, display blank), unit must
be turned on. To turn on your appliance, push and hold
for five (5) seconds, the “ON/OFF” button located on the
display panel (see Figure 2).
Once products are loaded, allow at least 48 hours for
the unit to stabilize before making any adjustments to the
initial setting.
Set Your Temperature Mode
This product can display either Fahrenheit or Celsius. To
do so, press the “
°
F/C” button on the display panel.
Set the Controls
The available temperature range of the unit is from 33 to
47 degrees F. The temperature set point is initially set in
the factory at 38 degrees F. The temperature set point can
be lowered or raised by first pushing the “SET” button on
the display pad. A “SET” icon will be displayed. Pushing
either the “WARMER” or “COLDER” buttons located on the
display pad will raise or lower the set temperature by one
(1) degree F or C (depending on your setting). As with any
refrigeration product, there is a slight temperature variance
at different locations within the cabinet.
Adjustable Temperature Control
The temperature control is fully adjustable from the low
thirties to the high forties. The range allows flexibility of
temperature preferences.
Interior Light
The upper and lower interior lights make it easy to view
your food and beverages. The light will always come on
when either drawer is opened.
Warning Alarms
Your refrigerated drawers have been fitted with a
Sentry
System
™ refrigeration monitor. This monitor will let you
know if your drawers are not functioning properly for opti-
mum food and beverage storage.
Door Ajar Alarm
If the door has been left open for over five (5) minutes, the
alarm will sound and the LED will flash green. This will
stop as soon as the door is closed.
High and Low Temperature
If your unit reaches temperatures outside normal operating
temperatures for your set point for more than one (1) hour,
an alarm will sound and the LED will flash red. This will
warn you that your contents have seen temperatures that
may not be conducive for long-term storage.
Power Failure
If your unit experiences a power failure, the LED will flash
amber until the alarm is reset.
Reset Alarms
Press the “ON/OFF” button for approximately one (1) sec-
ond. This will reset all audible and display alarms.
Sabbath Mode
Your refrigerated drawers are equipped with a Sabbath
Mode feature. By activating this mode, you will be dis-
abling all displays, audible alarms and lights.
To activate the Sabbath Mode, press and hold the “SET”
button while pressing the “
°
F/C” button four (4) times within
seven (7) seconds. To disable Sabbath Mode, repeat the
process. Sabbath Mode will automatically deactivate after
72 hours.
Figure 2
SENTRY SYSTEM
™ REFRIGERATION MONITOR
3
38
Содержание 24" Refrigerated Drawers 6ORDE
Страница 11: ...NOTES 10 ...
