2 Move the choke lever to the closed (l"I ) position
and move the stop switch to the
"ON"
position.
Choke Lever
Starter Grip
STOP
START(ON)
Stop Switch
Fast-idle lock
A
WARNING
POTENTIAL HAZARD
• The components of your recoilstarter
assembly are under high spring tension.
H improperly disassembled these parts
maystrike you with considerable force,
possibly causing personal injuly.
WHAT CAN HAPPEN
• Contact with the parts can cause sever
er personal injury.
HOW TO AVOID THE HAZARD
• Never attempt to disassemble your
recoil starter assembly yourself.
Always consult you r authorized
Maruyama dealer for repair by qualified
service technicians.
3 Lock the throttle trigger in the fast-idle start posi-
"�·
tion, then pull the starter grip
4 After the engine starts, squeeze and release the
throttle trigger to return it to the idle position, then
move the choke lever to the open ( ) position
I
f
the engine stops running before you move the
choke lever to the open ( ) position:
A Go ahead and open the choke.
B. Make sure the throttle trigger is set to the idle
position
C Pull the starter grip until the engine starts
Hot Restart
To
start an engine that is already warmed up (hot
restart), or if the ambient temperature exceeds 68
°
F
(20
°
C):
1
Pump the primer bulb at the bottom of the carbu
retor until fuel can be seen flowing through the
fuel return line to the fuel tank
2.. Move the choke lever to the open ( - ) position
and move the stop switch to the
"ON"
position
3 Leave the throttle trigger in the idle position and
pull the starter grip
4 If the engine fails to start after three to four pulls,
follow the instruction in the Cold Starting
Procedure section (pagel9)
If the engine fails to start after you follow the
above procedures, contact an au thorized
Maruyama dealer.
To Stop The Engine:
I
Release the throttle trigger
2.
Slide the stop switch to the "STOP" position
-18-
