
60
Specifications: Other
External Logic Controls
Opto-isolated; 3.3 kΩ internal build out resistor permits 5V-24V DC control voltages.
A tap off the internal 5V source is brought out to the rear connectors through a 100 Ω build out resistor
as VCC_LIM to power the opto-isolators in custom interfaces.
AC power
115 Volt units
115 VAC +/- 10% 50-60 Hz
25 VA maximum
Mains fuse T .315 A 250V (5x20mm format)
230 Volt units
230 VAC +/- 10% 50-60 Hz
25 VA maximum
Mains fuse T .315 A 250V (5x20mm format)
Physical
Dimensions
19” x 1 3/4” x 10 1/2”
Weight
5 lbs.
Mounting
RETMA rack ears on front; rear cables must be supported.
Remote Control Interface
9-pin connector provides power and communication for the optional remote control.
Nominal interface cable is standard 25-foot 9-pin #26 gauge shielded cable.
Units have been tested with up to 50 feet of cable.