background image

3

1. Read Instructions

– All the safety and operating instructions should be read before

the product is operated.

2. Retain Instructions

– The safety and operating instructions should be retained for

future reference.

3. Heed 

Warnings

– All warnings on the product and in the operating instructions should

be adhered to.

4. Follow Instructions

– All operating and use instructions should be followed.

5. Cleaning

– Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp, soft cloth for cleaning.

6. Water and Moisture

– Do not use this product near water—for example, near

a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.

7. Accessories

– Do not place this product on an unstable cart, stand, tripod, bracket

or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer, or sold with the product. Any mounting of the product
should follow manufacturer’s instructions and should use a mounting accessory
recommended by the manufacturer.

8. Ventilation

– Slots and openings in the cabinet are provided for ventilation and

to ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.

9. Power Sources

– This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power supply
to your home, consult your product dealer or local power company. For products intended
to operate from battery power, or other sources, refer to the operating instructions.

10. Grounding and Polarization

– This product may be equipped with a polarized

alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

11. Power-cord Protection

– Power supply cords should be routed so that they are

not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the product.

IMPORTANT SAFETY INSTRUCTIONS

Содержание MLT-1





















Отзывы: