CONNECTING AND REMOVING THE CABLE
Attach the cable to the left side of the headphones. When properly attached, the
remote and microphone should be on the side closest to the headphones. To remove
the cable, grip the connector between your fingers and gently pull it away from the
headphones.
COLLAPSING THE HEADPHONES FOR TRAVEL
Gently slide both ear cups up until they are next to the headband. Swivel each ear
cup 90 degrees so the headphones are flat. Place the headphones in the travel case.
REPLACING THE EAR PADS
Gently pinch and pull the old ear pad away from the ear cup. Work the leather edge
on back of the new ear pad into the channel around the perimeter of the ear cup.
It is sized to fit snugly.
