MartinLogan Loudspeaker Systems Скачать руководство пользователя страница 21

21

The Scenario hybrid speaker system consists of a broad-range

single element electrostatic transducer integrated with a quick-

response woofer. This approach takes advantage of the

benefits that both technologies have to offer. Dispersion is a

controlled 30 degrees. This was achieved by curving the elec-

trostatic transducer element itself, an elegantly simple solution.

System Frequency Response

45–22,000 Hz ± 3 dB

Dispersion

Horizontal:

30 Degrees 

Vertical:

23’ Line Source

Sensitivity

89 dB/2.83 volts/meter

Impedance

Nominal: 

6 ohms, 

Minimum:

2 ohms @ 20 kHz 

Crossover Frequency

500 Hz

Components

Custom-wound audio transformer, air core coils

Woofer Type

8" high excursion, high rigidity cone with extended

throw driver assembly, non-resonance asymmetrical 

chamber format

Power Handling

200 watts per channel

Recommended Amplifier Power 

80–200 watts per channel

Weight

39 lbs. each (17.6 kg)

Size

10” inches W × 15.5” inches D × 47” inches H

(25 cm W × 39 cm D × 119 cm H)

Your Scenario speakers are provided with an automatic Limited

90 Day Warranty coverage.

You have the option, at no additional charge, to receive a

Limited 5 Year Warranty coverage. To obtain the Limited

5 Year Warranty coverage you need to complete and return

the Certificate of Registration, included with your speakers,

and provide a copy of your dealer receipt, to MartinLogan

within 30 days of purchase.

MartinLogan may not honor warranty service claims unless

we have a completed Warranty Registration card on file!

If you did not receive a Certificate of Registration with

your new Scenario speakers you cannot be assured of having

received new units. If this is the case, please contact your

authorized MartinLogan dealer.

Service

Should you be using your MartinLogan product in a country

other than the one in which it was originally purchased,

we ask that you note the following:

1. The appointed MartinLogan distributor for any given

country is responsible for warranty servicing only on

units distributed by or through it in that country in

accordance with its applicable warranty.

2. Should a MartinLogan product require servicing in a

country other than the one in which it was originally

purchased, the end user may seek to have repairs performed

by the nearest MartinLogan distributor, subject to that

distributor’s local servicing policies, but all cost of

repairs (parts, labor, transportation) must be born by

the owner of the MartinLogan product.

3. If, after owning your speakers for six months, you

relocate to a country other than the one in which

you purchased your speakers, your warranty may be

transferable. Contact MartinLogan for details.

General Information     21

G

ENERAL

I

NFORMATION

Warranty and Registration

Specifications

Содержание Loudspeaker Systems

























Отзывы: