background image

12     Frequently Asked Questions and Troubleshooting

F

REQUENTLY

 A

SKED

 Q

UESTIONS

 

AND

 T

ROUBLESHOOTING

How do I clean my speakers?

Just use a dust free cloth or a soft brush to remove the 
dust from your speakers. We recommend a specialty 
cloth (available at the Xtatic shop at www.martinlogan.
com) that cleans your speakers better than anything 
else we have tried.

 Do not spray any kind of clean-

ing agent  on or in close proximity to the ATF 
element.

What size amplifier should I use? 

We recommend an amplifier with 100 watts per channel 
for most applications. Probably less would be ade-
quate when used in home theater where a subwoofer 
is employed. Our hybrid designs will perform well with 
either a tube or transistorized amplifier, and will reveal 
the sonic character of either type. However, it is impor-
tant that the amplifier be stable operating into varying 
impedance loads: a stable amplifier will be able to 
deliver twice its rated wattage into 4 Ohms and should 
again double into 2 Ohms.

Could you suggest a list of suitable electronics and 
cables that would be ideal for MartinLogan speakers? 

The area of electronics and cable choice is probably 
the most common type of question that we receive. It is 
also the most subjective. We have repeatedly found that 
brands that work well in one setup will drive someone 
else nuts in another. We use many brands with great 
success. Again, we have no favorites; we use electronics 
and cables quite interchangeably. We would suggest 
listening to a number of brands—and above all else—
trust your ears. Dealers are always the best source for 
information when purchasing additional audio equipment 
or cables and will be well versed in the subject of special 
safety requirements for in-wall cable.

Will exposure to sunlight affect the life or perfor-
mance of my speakers? 

We recommend that you not place any loudspeaker 
in direct sunlight. The ultraviolet (UV) rays from the sun 
can cause deterioration of grill cloth, speaker cones, etc. 
Small exposures to UV will not cause a problem. In 
general, the filtering of UV rays through glass will greatly 
reduce the negative effects.

Output

•  Check that all your system components are turned on.
•  Check your speaker wires and connections.
•  Check all interconnecting cables.

Frequently Asked Questions

Troubleshooting

Содержание In-Wall Loudspeaker

















Отзывы: