MartinLogan Dynamo 1100X, Руководство пользователя

Страница: 55 / 108

3
The ARC Mobile app can use a Bluetooth connection to the
subwoofer. Use of your subwoofer's built-in USB Input is not
required to run Anthem Room Correction.
For those who desire to run ARC using a computer, the USB Input
allows connection of your subwoofer to a computer via a Micro
USB connection. Depending on the version of your ARC kit (sold
separately) you may need a USB (Type A) to Micro-B USB cable
or a Mini-B USB (Female) to Micro-B USB (Male) adapter.
The USB Input can also be used to apply firmware updates to your
subwoofer.
Status
Your subwoofer is equipped with a multi-color LED to indicate the
current status of the subwoofer.
• No color: No power. The subwoofer is not plugged in or has
shutdown due to an overload condition. Unplug the subwoofer
and plug it back in to correct.
• White: Play mode. This indicates the subwoofer detects an
audio signal and has automatically switched into play mode.
•
Red: Standby. The sub has switched into power saving mode.
• Flashing: Error. The sub is displaying an error code.
Power Mode and Trigger Input
The Power Mode switch allows control of when the subwoofer
turns on and off.
• Auto: When set to 'Auto' the subwoofer will turn itself on when
detecting an audio signal. After several minutes of inactivity the
subwoofer will put itself in standby mode.
• On: When set to 'On' the subwoofer will always be on.
• Trigger: D
ynamo
800X, 1100X, and 1600X are equipped
with a trigger input. If you have an external source component
(such as a receiver) with built in trigger controls, you may wish
to turn the subwoofer on and off using this source. Connect a
cable from the control component to your subwoofer's Trigger
Input and set the Power Mode switch to 'Trigger'. Although
this technology is commonly referred to as a 12V trigger, the
subwoofer will respond to any signal between 5–24V DC.
Audio Signal Connections
Line Level Input (Left In / Right In)
Found on D
ynamo
600X, 800X, 1100X, and 1600X. Please
note, on the 600X the Right In also serves as the LFE In. Connect
from the Main Out or Pre Out on your receiver/pre-amp. The set-
ting for the Low-Pass Filter control is applied to the signal received
through these inputs.
Figure 3.
Audio signal inputs.
Line Level
(RCA)
Balanced
(XLR)
Speaker Level
(Banana Jacks)
Wireless Audio
(sold separately)
Left In &
Right In
LFE In LFE In
Left In &
Right In
Left In &
Right In (LFE In)
D
ynamo
600X
ü
(Right In doubles as LFE In)) –
ü ü
D
ynamo
800X
ü ü – ü ü
D
ynamo
1100X
ü ü ü ü ü
D
ynamo
1600X
ü ü ü ü ü
Figure 2.
Controls and inputs.
Setting Control
(Switch)
Level
(Knob)
USB Input
(Micro-B USB)
Status
(LED)
Power Mode
12V Trigger
Input
App / Local Min – Max – – On / Auto
D
ynamo
600X
ü ü ü ü ü –
D
ynamo
800X
ü ü ü ü ü
(+ Trigger)
ü
D
ynamo
1100X
ü ü ü ü ü
(+ Trigger)
ü
D
ynamo
1600X
ü ü ü ü ü
(+ Trigger)
ü
English