Martinelli Primo Viaggio Tri-Fix K, Инструкция по эксплуатации

Страница: 14 / 36

14
MARTINELLI IS A PEG PEREGO BRAND
Product characteristics
• The "Primo Viaggio Tri-Fix K" group 0+ car seat has been
subjected to all safety tests and is type approved under
European standard ECE R44/04, for children of weight from
0 to 13 kg (0 to 12-14 months).
• IMPORTANT: "Primo Viaggio Tri-Fix K", group 0+,
must be installed in a rearward-facing position, on
seats without airbags. Do not install “Primo Viaggio
Tri-Fix K” on rearward- or sideways-facing vehicle
seats.
• "Primo Viaggio Tri-Fix K" has an “Adjustable Side Impact
Protection System”: this offers improved protection against
side impacts with the “simultaneous system” for headrest-
harness adjustment.
• "Primo Viaggio Tri-Fix K" is type approved for installation in
vehicles without a base support or with two types of base
as required (the use of a seat base offers improved safety):
"Adjustable Base" or "Isofix Base" (check that the vehicle is
fitted with the Isofix system -a list of vehicle models fitted
with the system is provided with the product).
WARNING
•
Read the instructions carefully before use and keep
them in the holder provided for future reference.
Failure to closely follow the car seat installation
instructions will put your child at risk.
•
Never leave the child unattended.
•
Always use the restraint system.
• The assembly and installation operations must be
conducted by adults.
• Avoid inserting fingers into the mechanisms.
• Install this group 0+ car seat in a rearward-facing position.
• Death or serious injury can result if this car seat is installed
on seats with airbags.
• Eliminate danger by disabling airbags surrounding the
position of the car seat.
• In the case of rotating or movable seats, it is important to
install this car seat in a rearward-facing position.
• When travelling take special care to make sure that
luggage or other objects do not injure the child in the car
seat in the case of accidents.
• Do not use installation methods different from those indicated.
This would result in the risk of detachment from the seat.
• Car seat, group 0+, “Universal” category, type approved
under European standard ECE R44/04 for children of
weight from 0 to 13 kg (0 to 12/14 months). Suitable for
installation on the majority of vehicle seats, but not all.
• Group 0+ car seat with class E Semi-Universal Isofix base
(accessory).
• The car seat can be correctly installed if the vehicle’s use
and maintenance manual indicates compatibility with
“Universal” group 0+ restraint systems.
• This car seat is classed as “Universal” in compliance with
stricter type approval criteria than previous models that do
not have type approval labels.
• The car seat can only be used in type approved vehicles,
fitted with static or inertia-reel three-point seatbelts,
approved under regulation UN/ECE no. 16 or equivalent
standards. It must not be used with two-point or lap
seatbelts.
• To install the car seat, pass the three-point seatbelt
through the car seat’s light blue belt routers. Do not use
installation methods different from those indicated. This
would result in the risk of detachment from the seat.
• Ensure that the vehicle’s three-point seatbelt fixing the car
seat is always taut and not twisted. It should be replaced in
the case of heavy stress as a result of an accident.
• Never remove the child from the car seat while the vehicle
is in motion.
• Make sure that the car seat is not locked by a movable part
of the vehicle seat or by a door.
• To avoid the risk of falling, always use the car seat harness
even for transport outside the vehicle. Adjust the height
and tension of the shoulder straps ensuring that they are
snug to the child’s body without constricting him/her too
much. Check that the harness is not twisted and that the
EN_English