Martin VDO Face 5, Руководство пользователя

Страница: 19 / 56

Physical installation 19
Installing VDO Face 5 panels on the Face Footer system
Panel brackets
See Figure 14. Brackets for
fastening panels to ladders are
included in the Face Footer
system. Viewed from the back of
the panel array:
• bracket A fastens to two panels
on the left-hand edge of the
array,
• bracket B fastens to four panels
in the middle of the array, and
• bracket C fastens to two panels
on the right-hand edge of the
array.
The brackets are telescopic to
allow for minor variations in the
positions of panels. Brackets
clamp onto Face Footer panel support ladders with half-coupler clamps and bolt to panels with the supplied
Allen (hex) head bolts.
Fastening panels into place
To install VDO Face 5 panels on the Face Footer components:
1. Check that the Face Footer components are correctly installed. Pay particular attention to “Safety limits
with single row of stabilizer legs” on page 15. Check that the required weight of ballast for the number of
panels that will be stacked vertically and for the number of stabilizer legs is fastened to the rear of the
stabilizer legs and cannot be removed.
2. See Figure 15.
Place the first panel
over the upright pins
(arrowed) in the top
of the first base unit
at the right-hand (as
viewed from the
back) edge of the
array.
Figure 14: Face Footer panel brackets
A B C
Figure 15: Installing the first panel