16
VDO Face 5™ user manual
Safety limits with two rows of stabilizer legs
When installing VDO Face 5™ video panels in vertical columns on VDO Face Footer floor stands with
two
rows of stabilizer legs installed on the back of base units, see Figure 7. Fasten ballast such as sand bags to
the rear end of each rear stabilizer leg, i.e. as close as possible to the back of the installation. The ballast
must have at least the weight indicated in Figure 7 for the number of panels in the column. Do not stack
more than eight (8) VDO Face 5™ panels in a vertical column.
Creating a stacked array
Installing VDO Face Footer system components
To create a free-standing array of VDO Face 5 panels to form a flat video display surface:
1. Unpack the components from
their flightcase. It will simplify
repacking if you note how they
are packed by taking photos
with a smartphone, for
example.
2. Lay out bases and stabilizer
legs as shown in Figure 8. You
must fasten legs
B
into base
units
A
at each edge of the
array. You must also fasten a
stabilizer leg
C
into one of the
base units
A
each time you join
two base units side by side
(see
D
). It does not matter
which of the two base units you
fasten the leg
C
into.
Figure 7: Safety limit and ballast required with two rows of stabilizer legs
Two stabilizing legs
Maximum 8 panels vertically
with 15 kg ballast fastened to
Number of panels
installed vertically
Ballast required at
rear end of each
rear leg
1-3
0
4
0
5
0
6
0
7
0
8
15 kg (33 lbs.)
rear end of rear leg
B
Figure 8: Face Footers components
A
C
B
A
D
Содержание VDO Face 5
