Martin Tripix Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Martin Tripix Скачать руководство пользователя страница 7

7

Tripix user manual

Introduction

Thank you for selecting Tripix™, a compact IP66-rated LED-based
color-changing striplight from Martin™. The Tripix is available in short
300 mm (11.8 inch) and long 1200 mm (47.2 inch) models. Both
fixtures are powered by the Tripix Power™.

Diffuser filters that give wider beam angles are available from Martin.

This product features:

•

RGB (red, green, blue) color mixing, with raw and calibrated RGB

plus calibrated HSI and HSIC (hue, saturation, intensity, color
temperature) color control options

•

81 W LED power and 1440 lumens total output (at narrow beam

angle) from Tripix 1200

•

24 W LED power and 360 lumens total output (at narrow beam angle)

from Tripix 300

•

Tripix Power can drive up to twenty-four Tripix 300s or six Tripix

1200s, or any mixture of Tripix 300 and Tripix 1200 devices that not
exceed 7.2 meters (23 ft. 7 in.)

•

Possibility of controlling all fixtures attached to an Tripix Power as one

single RGB, HSI or HSIC pixel

•

One Tripix 1200 fixture can be controlled as four single RGB pixels

•

DMX 512A control

•

Clamp mounting system for standard 35 mm DIN rail

•

64 built-in stand-alone programs

•

Master/slave functionality with 64 pre-programmed stand-alone

shows available

For the latest firmware updates, documentation, product specifications
and other information about this and all Martin Professional™ products,
please visit the Martin website at http://www.martin.com

«
...
5
6
7
8
9
...
»

Содержание Tripix













































Отзывы:

Нет отзывов