Martin Tripix, Руководство пользователя

Страница: 11 / 44

11 Tripix user manual
To mount the fixture on a surface using 35 mm DIN rail:
1. Fasten the DIN rail securely to the mounting surface.
2. See Figure 2. The fixture mounting bracket has a hooked profile on
one side (see A). Hook this profile over the top of the DIN rail and
swing the bracket down. Use a 2.5 mm Allen key to tighten the
mounting clamp screw (see B).
(A) (B)
Figure 2: Mounting on DIN rail
Mounting the Tripix fixture vertically
The mounting clamp screws will not hold the product securely on the
DIN rail if fixture is installed vertically. You must therefore insert screws
in the mounting surface through the DIN rail mounting holes (see
Figure 3) so that the fixture mounting clamps rest against these screws
and secure the fixture.
Figure 3: Vertical mounting on DIN rail