background image

RUSH SM 650

TM

 User Manual 

12

Remote control 

The SM 650 smoke machine comes with 2 remote control options: a wired remote 
control and a 4-channel wireless remote control. There are two identical sockets 
on the rear panel so that both remote controls may be connected and used at the 
same time.  

Wired remote control 

The wired remote control has a 4.5 m (15 ft.) cable that plugs into either remote 
control socket on the rear panel. The status LED on the remote control is off while 
the machine is heating and lights green when the smoke machine is ready for 
use.  

4-channel wireless remote control and receiver  

The 4-channel wireless remote control transmitter (shown below to left) has a 
range of 30 meters (100 feet). It provides individual control of up to 4 smoke 
machines and simultaneous control of an unlimited number of machines in up to 4 
groups.  

 

The remote control receiver (shown above to right) connects to a remote control 
socket on the rear panel. It has green (ready) and red (heating) LEDs to show the 
machine’s status.  

The DIP switch on the side of the receiver sets the remote control button that 
triggers the machine. Flip the switch that corresponds to the desired transmitter 
button to the ON position. Flip all other switches to OFF. The smoke machine 
responds to all buttons for which the DIP switch is in the ON position.  

Содержание Rush SM 650





















Отзывы: