Martin Rush SM 650, Руководство пользователя

Страница: 10 / 20

RUSH SM 650
TM
User Manual
10
Physical installation
Warning! Read ‘Safety information’ on page 4 before
installing the smoke machine.
The smoke machine is designed for indoor use only and must be
used in a dry location with adequate ventilation.
Martin™ can supply suitable safety cables and rigging clamps for use with the
smoke machine (see ‘Accessories’ on page 19).
Do not suspend the machine immediately over areas with public access.
Ensure that there is at least 500 mm (20 in.) clearance all around the machine
and at least 1 m (40 in.) clearance in front of the output nozzle. Keep combustible
materials at least 1 m (40 in.) away from the machine.
The machine can be tilted up to 45 degrees up or down from horizontal if the tank
is partially filled. Overfilling or steeper tilting may cause fluid leakage.
Mounting the smoke machine on a truss
The smoke machine can be clamped to a truss or similar
rigging structure and tilted up to 45 degrees from horizontal.
When installing the smoke machine with the mounting
bracket hanging vertically down, you can use an open-type
clamp such as a G-clamp. If installing with the mounting
bracket in any other orientation, you must use a half-coupler
clamp (see illustration on right) that completely encircles the
truss chord.
To clamp the smoke machine to a truss:
1. Install the mounting bracket on the smoke machine and secure with both
tightening handles.
2. Check that the rigging structure can support at least 10 times the weight of all
smoke machines and other equipment to be installed on it.
3. Block access under the work area.
4. Bolt a rigging clamp securely to the mounting bracket. The bolt used must be
M12, grade 8.8 steel minimum. It must pass through both mounting bracket
legs and be fastened with a self-locking nut.
5. Working from a stable platform, hang the smoke machine with its clamp on
the truss and fasten the clamp securely.
6. Secure the smoke machine with a safety cable as directed below.