manualshive.com logo in svg

Martin PIT VIPER, Руководство по установке

Поделиться
Скачать
Martin PIT VIPER Скачать руководство пользователя страница 27

© Martin Engineering GmbH

25

M3735UK-09/15

Maintenance

 6. Follow the instructions in Section 6.3 to replace any worn out 

blades.

 7. Clean all the warning labels. Replace illegible warning labels 

immediately. Warning labels can be purchased from Martin 
Engineering or a contracted dealer.

 8. Remove all tools from the working area.
 9. Switch on the conveyor system.

NOTE

Take the corresponding parts out of service if any indications of 
functional disturbances are noticed. Contact Martin Engineering or 
one of its representatives for support. Do NOT start up the 
conveyor system until the cause of the problems has been 
recognised and eliminated.

CAUTION! RISK OF DAMAGE!

Blades must not be worn out beyond the wear line; this can cause 
serious material damage.

Inspect the blades regularly and replace them in a timely manner! 

CAUTION! FLYING OBJECTS!

Forgotten tools or installation parts can fall off of the running 
conveyor belt and cause minor injuries and property damage.

Always remove any tools from the installation site and conveyor 
belt upon completion of the installation work before switching on 
the power supply.

Содержание PIT VIPER










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды