Martin M3910, Руководство оператора

Страница: 22 / 38

Martin Engineering M3910-04/19 18 Martin
®
Electric Vibrators
Figure 10. Adjusting Eccentric Weights
Figure 11. Example of Adjustable Weights Set at 50%
4. See Figure 11. Rotate adjustable eccentric weight to proper setting. To
produce more force, move weight to higher setting (i.e., higher number).
When set, tighten socket head cap screw according to Table II.
5. Check o-rings for damage. Replace if damaged.
CAUTION
!
Do not operate vibrator with weight covers removed. Dust
accumulating around vibrator shaft could cause unit to fail.
6. Replace weight covers.
A
B
C
D
A.
B.
Socket Head Cap Screw
Adjustable Weight
Shaft
Fixed Weight
C.
D.
Weight adjustment disk attached to fixed weight
Arrow shows
direction to turn
adjustable weight
to increase
unbalance
After Installation