manualshive.com logo in svg

Martin LIGHTING DIRECTOR, Руководство пользователя

Поделиться
Скачать
Martin LIGHTING DIRECTOR Скачать руководство пользователя страница 47

CHAPTER 5 - Layer Media

The Martin Lighting Director software lets you define relationships between the
position and velocity of the performer(s) being tracked by the system and media such as
lighting, music or other audiovisual equipment. Using the MLD software you can specify
when, where, how and what will happen when your performers move in predefined
areas of the stage. In this chapter you will learn the steps to work with media
behaviour: First you define an area or a volume of your stage where you want
something to happen. Second you tell the software what media will be controlled by
the tracking system in that area or volume. Next, you define how the specified media
will behave as your performers move in the defined area. Finally, you tell the MLD
when you want the media behaviour enabled and who will control the map.

The following figure shows the main screen of the MLD:

   

Figure 26 - Main MLD screen, showing a region being moved

and all 8 layers being used.

   

interactive perimeter

   

selected layer

   

visibility checkbox

   

editor tools, from L to R: 

region tool, selection tool,
deletion tool, zooming tools

   

Editor options

   

tracker assignment for map

  

Map Editor

The “map editor” is a “bird’s eye” view of an area measuring 26 x 26 m (43 x 43 ft). 
Within this area, the actual area being tracked is defined by the positions of your stage
marks used in the system calibration (see chapter 2). If the system calibration has been
done, you will notice that the map editor shows the position of the stage marks and a
perimeter that surrounds those stage marks. As the mouse pointer rolls over the map
editor, coordinates in centimeters (or inches) appear in the lower right corner. These
coordinates use your centre stage as the “origin”, that is, the centre stage is zero. As

 MLD manual 1.1 

Page 47

Содержание LIGHTING DIRECTOR










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды