Martin JEM ZR44 Hi-MASS, Руководство пользователя

Страница: 14 / 28

14 DMX control
DMX control
O v e r v i e w
DMX is a digital control system widely used in entertainment and architectural
lighting. Any controller meeting the DMX-512 standard may be used to control
and program the fog output of the fog machine.
C o n n e c t i o n
The fog machine provides both 3 & 5-pin XLR plug and socket on the rear panel
for DMX connection. The wiring is shown below.
Connector pin function
1

Ground

2

Data – (“Cold”)

3 Data + (“Hot”)
For best results, use cable designed for high speed digital data transmission.
D M X f u n c t i o n s
The fog machine operates from a single DMX channel which gives proportional
control of fog density from 0-100%.
DMX Level function
0 – 12

No fog

13 – 255

Fog at variable density, (13=minimum, 255=maximum)

When the machine is receiving valid DMX data, the indicator light next to the
address switches will light.