Control
settings
13
Control settings
Overvi ew
The four quick access buttons to the left and right of the digital display at the rear
of the unit allow you to quickly set the haze level and engage timer or continuous
run modes.
The digital display in the centre of the top panel allows you to configure the
machine using option menus.
Qui ck access buttons
The two quick access buttons to the left of the display allow you to quickly set
the machine to one of two haze output levels, and engage timer mode or
continuous run mode. The display shows the current setting.
quick mode
haze and fan settings
Haze 55%, Fan 20%
Haze 20%, Fan 20%
The buttons to the right of the display change the operating mode.
Press RUN to turn on haze in continuous run mode. The display shows
.
To stop the haze, press the Run button again to set the machine to Standby
mode (heaters remain on).
Press SILENT to engage a low noise mode which slows down the fan. If the RUN
button is used to stop the haze, Silent mode is not cancelled. Silent mode is a
global setting and will affect both manual and DMX control. Note that using silent
mode may cause increased gas consumption.
To change the preset settings, adjust the Fan and Haze settings
using the menu, then within 3 seconds press the Pre1/Pre2 button
to store the settings.
will then be displayed if successful.
Menu previous/next
buttons
Value down/up
buttons
Digital display
Enter/store button
