Martin DT2S, Руководство оператора

Страница: 14 / 38

Martin Engineering M3687-12/17 10 Martin
®
DT2S Reversing Cleaner
Adjusting the
Spring Tensioner
1. Loosen the lock nut above the spring. Repeat for both sides.
2. Turn adjusting nut (equally on both sides) until cleaner blades are lightly
touching the belt.
3. Ensure the blade position is equal across belt and blades are lightly
touching across belt width.
4. Continue turning the adjusting nut equally on both sides until the spring-
compressed length is the same as indicated in Table II.
5. Tighten the lock nuts against the adjusting nuts.
Figure 4. Spring Tensioner Operation
7.00
(178)
6.00
Lock Nut
Adjusting Nut
Threaded Rod
Belt Travel
(152)
10.38
(264)
4.50
(114)
11.26
(286)
Installation