Martin-Till UMO-WA1345, Руководство по установке

Страница: 7 / 19

STEP 4 : ATTACH 1345 FRAME ASSEMBLY TO THE MOUNT
IMPORTANT:
Stop arm installation, as shown in the picture, is for the right UMO configuration . For a left
UMO configuration, install the right stop arm (STARM1360 - 5 - 8R) on the opposite side.
1. Align the holes in the mount and the frame assembly. Insert the 5/8” x 2 1/2” and the 5/8” x 2” bolts
from the outside. Add the Stop Arm and other 5/8” x 2” bolt as it is shown in the picture. Place the
bushings (BU7858) and nuts on the 5/8” x 2” bolt and on the 5/8” x 2 1/2” bolt from inside.
2. Tighten the three bolts to 112 ft - lbs. Check after first day of use.
3.
Check to ensure the frame is not binding on the mounting bracket and is free to float up and down.
4.
Install the 5/8” X 3” bolt on the Stop Arm as threaded adjustment assembly and tighten the 5/8” Thin
Nut to lock it after the adjustment.
6
5/8” FLANGE LOCKNUT
(NFSL007)
5/8” X 2”
FLANGE BOLT
(BFS0152)
5/8” X 2 1/2” FLANGE
BOLT (BFS0154)
STOP ARM
(STARM1360 - 5 - 8L)
5/8” THIN NUT (NHSJ013)
5/8” X 3” BOLT (BHS0543)
BUSHINGS
(BU7858)
5/8” X 2” FLANGE
BOLT (BFS0152)