Martin System TT200, Руководство пользователя

Страница: 16 / 64

1.3 Attributing the collar to the remote
To have the remote controlling the collar, follow the instructions :
Hold the remote’s red point (on the right side of the remote) against
the collar’s point (engraved in on the front side), until the LED flickers
orange. Take the remote away from the collar and touch the «impulse»
key on the remote. The LED will flicker green to indicate the operation
has been successful.
1.4 Choice of stimulation level
The stimulation level has to be selected on the remote. When it’s switched
on, the LCD screen indicates the previously selected level. To change the
level, touch the increasing arrow to increase, and the decreasing arrow
to decrease it. The levels are programmable from 0 to 9. The 0 level
sends only beep-sound, without impulse.
1.5 Choice of the program
There are four programs available on the remote.
Simultaneous sound and stimulation (electronic impulse with a beep-
sound);
Sound warning (beep-sound only when you touch briefly the impulse-
key, beep-sound followed 1 second later by an impulse if you hold your
finger on the impulse-key) ;
Impulse without sound (impulse without any beep-sound) ;
Only sound (only beep-sound, without any impulse).
•
•
•
•
16