Martin Audio DX1.5, Руководство пользователя, Страница: 7 / 23

All material © 2009. Martin Audio Ltd. Subject to change without notice.
You will need a 9 pin male-to-female, fully wired, pin-to-pin RS232 cable
Note: this lead should be pin-to-pin – not the null modem type.
To load the latest presets into your DX1.5
1. Connect the 9-pin male to 9-pin female DEE type serial lead from your computer to the
external socket on the rear of the unit.
2. On the DX1.5 use the blue Menu , Back , Next and Enter keys to go into the Interface Sub-
menu and then into External Interface.
3. Once entered, setup as follows:
Serial Speed : 38400
Press Enter to confirm
4. Run the programme MartinFlashLoader.exe .
5. Set the Serial Port Speed to 38400.
The bottom right hand window should indicate
Good Response .
If the
Serial Speed number is not set to 38400 to match the DX1.5 speed, the software lower
right window may indicate No Response .