Marti Electronics STL-10A Скачать руководство пользователя страница 4

WARNING

THIS EQUIPMENT MUST BE OPERATED WITH A 

3–

CONDUCTOR

GROUNDED AC POWER RECEPTACLE

.

  FAILURE TO USE A 

PROPERLY GROUNDED RECEPTACLE MAY RESULT IN IMPROPER
OPERATION OR A SAFETY HAZARD

.

LIMITED WARRANTY

The Seller warrants that, at the time of shipment, the
products manufactured by the Seller are free from de-
fects in material and workmanship. The Seller’s obliga-
tion under this warranty is limited to replacement or re-
pair of such products which are returned to Marti at its
factory, transportation prepaid and properly insured,
provided:

a.  Notice of the claimed defect is given to Marti with

in one (1) year  [two (2) years for STL systems] from
date of original shipment and goods are returned in ac-
cordance with Marti instructions.

b.  Equipment, accessories, tubes and batteries not

manufactured by Marti are subject to only such adjust-
ments as Marti may obtain from the supplier thereof.

c. This warranty does not apply to equipment which

has been altered, improperly handled, or damaged in
any way.

The Seller is in no event liable for consequential dam-
ages, installation cost or other costs of any nature as a
result of the use of the products manufactured or sup-
plied by the Seller, whether used in accordance with in-
structions or not.

This warranty is in lieu of all others, either expressed or
implied. No representative is authorized to assume for
the Seller any other liability in connection with Seller’s
products.

 

MAILING 

&

 SHIPPING ADDRESS

:

M

ARTI

 

Electronics

4100 North 24th Street

Quincy, Illinois 62301

The United States of America

COPYRIGHT NOTICE

2000 All Rights Reserved

Marti Electronics

No part of this manual may be reproduced, transmitted,
transcribed, stored in a retrieval system , or translated
into any language, natural or computer, in any form or
by any means, without the prior written permission of
Marti Electronics.

Artwork depicting circuitry in this manual is protected
by copyright laws.

Information in this manual is subject to change without
notice and does not represent a commitment on the part
of Marti Electronics.

Marti Electronics may make improvements and/or
changes in this manual or in the product described here-
in at any time.

This product could include technical inaccuracies or 
typographical errors.

PHONE NUMBERS:

Sales (817) 

735–8134

Sales FAX

(817) 735–9340

Service

(217) 224–9600

Service Fax

(217) 224–9607

Содержание STL-10A





















Отзывы: