Martellato 50PR002, Руководство по эксплуатации и обслуживанию

Страница: 9 / 23

16 17
DPL50PR002 - ENGLISH DPL50PR002 - ENGLISH
9.0 PACKAGING, STORAGE AND TRANSPORT
The appliance comes packed as follows:
• cardboard box
• operating instructions manual
• EC declaration of conformity
Storage conditions
In its full original packaging,
THERMAL
Warming Plate must be stored in:
• a dry place
• with temperatures in the -5° to 40 °C range.
10.0 TAKING OUT OF SERVICE / DISPOSAL
The product contains the following main kinds of material:
• tempered glass
• metal material
• electrical components
These materials must be disposed of in full compliance with
current environmental regulations.
As specified on the EC Declaration of Conformity,
THERMAL
Warming Plate complies with the European RoHS
directive 2011/65/EU.
THERMAL
Warming Plate falls into the category of products covered by the Europe-
an directive 2012/19/EU and, as such, is marked with the symbol:
You should therefore seek relevant information from the competent authorities.
It must be disposed of according to specific provisions relating
to products classed as <large household appliances> and <small
household appliances>.
Keeping the nameplates described above in good condition is essential for product safety.
If they have deteriorated or become illegible, please order new ones from the
manufacturer.
A copy of the EC Declaration of Conformity is attached to this manual.
PRODUCT COMPLIANCE AND MARKING
8.0 CLEANING
To wash the steel plate, use hot water and dishwashing liquid.
How to clean the plastic outer housing:
1. use a damp sponge with warm soapy water or detergents suitable for cleaning tem-
pered glass. Do not use abrasive sponges or steel wool;
2. be careful not to splash accessible electrical parts with water;
3. never immerse the product in water to clean it and make sure there are no residues
still left on the unit before you use it again.
Before cleaning the appliance, follow the steps below in the
order given:
1. Switch the appliance off with the ON/OFF switch;
2. Unplug the unit from the 230V
AC
power socket;
3. Make sure that none of the parts are still hot: if they are, allow
the unit to cool.
Materials and items due to come into contact with foodstuffs meet the requirements
of EU and Italian regulations.
Product imported by Martellato: Via Rovigo, 1/B - 35010 Vigonza PD
Italy - tel. +39 049 7800155 - fax +39 049 8087744
50PR002
nr MATR
230V ~50-60Hz IPX3 260 W 1,13 A Classe I
MADE IN CHINA