Martela Oyj
Takkatie 1
FI-00371 Helsinki
[email protected]
2.4 System configuration (example)
The figure on the right shows a configuration example
consisting of:
1. Power Supply
2. Bus cable
3. Handset
2.4 Adjustment
The table control, handset and motors are sealed units
and have no parts that can be serviced or adjusted by the
user. In case of failure/unexpected operation or for
maintenance please contact Martela.
3. OPERATION INSTRUCTIONS
To ensure safe operation of the Pinta EQB control unit, please observe the following safety instruc-
tions:
CAUTION
Risk of injury and electric shock
Keep children away from electric height-adjustable desks, control units and handset.
CAUTION
Risk of Pinching
When you change the desktop position (especially without using pinch protection), you must ensure
that no people or objects are located in the hazardous area nor may reach into it.
NOTICE
In case of a main power breakdown, or if the power cord is unplugged during the movement of the
drives, a manual reset may be necessary! Please see section 3.2.
NOTICE
The control unit might be damaged by power surges. Unplug the power cord during a thunderstorm or
if you do not intend to use the desk for a longer period
.
3.1 Basic functions
NOTICE
You must read the user manual carefully before installing or operating the control unit.
If the chosen handset does not fit to this user manual, please see separate user manual for actual
handset.
.
1.
2.
3.
