Martela Oyj
Takkatie 1
FI-00371 Helsinki
[email protected]
4. Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or exposed to water. In such event, please return the table to a service cen-
ter for examination and repair.
5. Never use this table without making sure that the cord can freely move in the whole height adjust-
ment area.
6. Keep the cord away from heated surfaces.
7. Do not use the table outdoors.
8. Do not operate the table in a potentially explosive atmosphere.
9. Do not use the hand switch when removing the plug from outlet.
WARNING
Risk of Electric Shock:
1. Connect this table to a proper outlet only. When loading items on the table, make sure to place
them away from the edges and to place the heaviest items at the bottom to help prevent the pos-
sibility of the furnishing tipping over.
WARNING
Risk of Injury to Persons:
1. Do not use this table to lift people and do not use this table to lift heavy parts or use this table as a
platform for storage.
2. Maximum intended load is 140 kg, uniformly distributed (309 pounds) including the tabletop.
DANGER
Risk of electric shock, injury, or death:
1. Improper usage, abuse, or misuse of the power supply, handset, motors and other electrical com-
ponents may result in an electrical shock injury or possible death.
2. Do not open the power supply unit or handset under any circumstances. The power supply and
handset contain no serviceable parts.
3. Do not modify or make any changes to the power supply, handset or other electrical devices.
4. During installation, repair, cleaning, moving and maintenance work, the power cable must be dis-
connected from the outlet.
5. The motors control unit is not designed for continuous operation. Changing the tabletop position
without interruption must not exceed the duty cycle indicated on the power supply. The unit is
thermally protected and will temporarily shut down if use exceeds the duty cycle. Allow a 9-minute
cooling period for the control unit to reset.
6. The power supply unit may only be operated with voltage as specified on the power supply label.
7. Only use the power cord supplied with the power supply. Check that it is not damaged. Do not op-
erate the power supply unit if the power cord is damaged.
8. Do not expose the power supply, handset or other electrical device to water or other liquids in-
cluding moisture, drips, splashes or spills. Only clean electrical device with a dry cloth.
9. Do not operate the power supply, handset or other electrical device in a potentially explosive at-
mosphere. Do not operate where aerosol spray products are being used or where oxygen is being
administered.
10. Do not use the table if it has been dropped or damaged. Contact the manufacturer for examina-
tion or repair.
11. It is not allowed to connect self-constructed products to the power supply, handset or other electri-
cal device. To prevent damage, use only components recommended by the manufacturing com-
pany.
WARNING
Risk of injury, or death: