Martela CAPA, Руководство пользователя, Страница: 9 / 12

RFID LOCK:
Operating Instructions - In Shared Use Functionality
In shared use functionality, the user presents any User RFID Credential
to lock and uses the same User RFID credential to unlock. Once
unlocked, the lock is available for a different user.
To lock:
1. Close the door.
2. Touch and present any User RFID Credential
3. Turn the knob to the locked position.
To unlock:
1. Touch and present the same User RFID Credential
2. Turn the knob to the unlocked position.
3. Open the door.
Operating Instructions - In Assigned Use Functionality
In assigned use functionality, users operate the lock with their
assigned user RFID credential.
To lock:
1. Close the door
2. Turn the knob to the locked position.
To unlock:
1. Touch and present any User RFID Credential
2. Turn the knob to the unlocked position.*
3. Open the door.
*The lock will remain in the locked position if the knob is not turned
within approximately 6 seconds.
Programming key and Manager key
•
Manager key (black) and the programming key (yellow) can be used
to provide emergency power to the lock if the lock batteries run out
before they can be replaced.
•
The keys also act as a master key if, for example, the user has
forgotten the numeric code that he has set.
Batteries
RFID lock is powered by 4 AA batteries.
Providing battery life of 115,000 cycles
After locking or unlocking, the lock emits two sets of three beeps
indicating that the batteries are low.
Battery replacement, see picture on left.
a. Remove the screw and the battery cover.
b. Replace the four premium AA batteries.
c. Replace the battery cover pack and screw.
Warranty does not cover batteries or damages caused by misuse.
Batteries estimated lifetime is about 3 to 4 years depending on use.
More info:
https://www.digilock.com/products/numeris/versa-mini/
Digilock Versa Mini
CAPA– LOCKS
USER INSTRUCTION