Martela CAPA, Руководство пользователя, Страница: 8 / 12

RFID LOCK:
RFID locks are operated by an RFID credential. Manager Keys provide
management access and external power. Programming is accomplished
via a Programming Key unique to the lock system.
RFID standard - Mifare (13.56 MHz)
Set Lock Functionality
RFID lock is available for either shared or assigned use.
To change the functionality of the locks (between shared use and
assigned use), contact locks manufacturer/ Digilock Support
(sales@digilock.eu) to request a Function Key.
Add Manager Keys
Each cabinet comes with a pre-programmed Manager key (black). If you
want additional management keys, you can add any supported RFID card
to act as an additional manager key. Manager keys can be programmed
to the locks at any time.
1. Go to a lock requiring additional manager credentials.
2. Touch and hold for 5 seconds (a two-tone beep will be heard
after 5 seconds) then release. The LED will flash and the Reader
will turn on.
3. Insert the Programming Key (yellow). A two-tone beep will be heard.
4. Present each Manager RFID one at a time. A two-tone beep will be
heard for each manager credential programmed.
5. Insert the Programming Key. A two-tone beep will be heard and the
LED and Reader will turn off.
Assign Users (for assigned use only)
Up to 20 users may be assigned to each lock. Make sure the lock is in
assigned use functionality (a green LED will flash when is touched).
1. Touch and hold for 5 seconds (a two-tone beep will be heard
after 5 seconds) then release. The LED will flash and the Reader
will turn on.
2. Insert a valid Manager Key (or present a valid Manager RFID). A
two-tone beep will be heard.
3. Present each User RFID one at a time. Two sets of two-tone beeps
will be heard for each user credential assigned to the lock.
4. Insert a valid Manager Key (or present a valid Manager RFID). A
two-tone beep will be heard and the LED and Reader will turn off.
Remove Users (for assigned use functionality only)
Make sure the lock is in assigned use functionality (a green LED will
flash when is touched).
1. Touch and hold for 5 seconds (a two-tone beep will be heard
after 5 seconds) then release. The LED will start to flash.
2. While the LED is flashing, insert a valid Manager Key (or present a
valid Manager RFID Credential). A two-tone beep will be heard.
3. Insert the Manager Key (or present the Manager RFID Credential
again.) Three sets of two-tone beeps will be heard and the LED will
turn off. All previously assigned user credentials will be removed.
Digilock Versa Mini
CAPA– LOCKS
USER INSTRUCTION