Martela Alku, Руководство пользователя

Страница: 23 / 64

Martela Oyj
Takkatie 1
FI-00371 Helsinki
export@martela.fi
1.3 Before you start
Check for and remove obstacles in path of the table top. Before first use, the control unit must register
the lowest point of elevation. Under normal conditions the system communicates internally and knows
the position of each column. If needed do reset as section 3.2.
If there are differences in column height, please do a manual reset as listed in section 3.2.
1.4 Electrical rating
Electrical rating, input: 100-240VAC, 50-60Hz, 3,2A. Output 35V.
2. ASSEMBLY & ADJUSTMENT
2.1 Assembly Instruction
The official assembly instruction comes along the table base.
To ensure that the desk-
top and frame combination is approved, please contact Martela.
2.2 System procedure
WARNING Risk of electrical shock:
The main power cord must be unplugged during the setup.
To setup the table:
1. Connect the handset to a 3-pin motor/motor house or to bus cable socket.
2. Connect the Bus cable between each motor/motor house.
3. Connect the power supply to the motor/motor house.
4. Assemble the power cord to the power supply.
5. The table is ready for use, connect the power cord to the outlet.
Bus cable
Handset
Power cord
Power supply