Martel BetaGauge PI, Руководство пользователя

Страница: 17 / 24

9. BetaGauge PIR Serial Interface
Instructions
Initiating Communication
The terminal communications can be setup using terminal
communication software on a PC. The terminal settings need to
be set as follows:
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
• Local echo on
List of Commands
Command Description
CAL_START Puts the calibrator in calibration mode
*CLS Clears the error queue.
FAULT? Returns an error code from the error queue
*IDN? Identification query. Returns the manufacturer, model
number, and firmware revision level of the Calibrator.
TARE Tares the offset pressure of the reading on the calibra-
tor
TARE? Returns the current tare value
PRES_UNIT? Returns the pressure unit for the upper display.
PRES_UNIT Sets the pressure unit for the display
ZERO_MEAS Zeros pressure of the calibrator
ZERO_MEAS? Returns the current zero offset value
MINMAX_RST Resets the minimum and maximum recorded values.
MIN? Returns the minimum recorded value
MAX? Returns the maximum recorded value
HC_OFF Turns unit off
HC_DFLT Sets auto off defaults
TEMP? Returns temperature in the chosen units
HC_COMP_OFF Turns temperature compensation off.
HC_COMP_ON Turns temperature compensation on.
HC_COMP? Returns state of temperature compensation.
HC_RD_2410? Return 2410 ADC counts.
15