5
For indoor use only. Use only for domestic purposes according to the instruction manual.
Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Be cautious when using blade.
Every time after use, make sure the appliance is turned off, the blades stopped completely. Only then open the lid.
Do not overload the appliance. The appliance is designed for processing relatively small quantities of food and maximum quantities given in the table should not be exceeded.
Never blend hot liquids!
Maximum time of continuous operation - no more than 1 minute with an interval for at least 5 minutes.
Do not use the device if the cord is damaged.
Do not use the device if the cup is empty.
Do not leave the device unattended.
Always disconnect the device from power supply if you do niot use it and before cleaning.
BEFORE THE FIRST USE
Please unpack your appliance and remove all packing materials
As with all appliances for the preparation of foodstuffs, it is advisable to clean those parts, which come into contact with food before using for the first time.
Do not immerse motor unit into water.
INSTRUCTION FOR USE
CHOPPING
Place the container on a flat steady surface.
Place the cutting blade on the drive spindle and put them into the container. Or place the whisk attachment on the drive spindle and put them into container.
Load the food items for chopping/whisking into the container.
Note
: Never fill the container over the Max mark on scale.
Place the container lid on top of the container, then place the motor unit.
Insert the plug into power supply.
Press the On button to start operation. The appliance will run as long as the button is kept pressed.
CAUTION:
For most kinds of food, it is advisable to press the On/Off button momentarily a few times in succession and then to continue operating until the required degree of fineness has
been achieved. Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute.
PREPARING THE INGREDIENTS
To avoid damage of blade, do not process, crush or grid hard items such as frozen food, ice, cereals, rice, spices and coffee
