MARSHELL DG24800, Руководство пользователя

Страница: 5 / 13

5
2.5 Function bar
Contains horn button, turning switch and front light switch
Front light switch horn button turning switch
（
Photo 5, function bar
）
2.5.1 Horn button
When press the button, the horn will work.
2.5.2 Turning switch
Turning switch is a button to choose the direction, when press L( turn left), the front and rear turning light will
shine with ringing. The same as the right. When at the middle position there is no ringing.
2.5.3 Front light switch
There are 0 and 1 to indicate the front light is on or off. 1 means the light is on, 0 means the light is off.
2.6 charge socket
When charging the battery you should move the cap of the socket up, insert the tie-in into the socket and
connect the other end with the power supply. When the red light on means the charger is work, when the green
light on means it is full of charge.
2.7 Current over loading protection tool
When the car is always climbing, over load or other troubles occurred and lead to big
current. The protection tool will cut of the power to protect the controller and the
motor. When troubles solved you can press the white button and the circuitry will recover.
2.8 Clutch handle bar
A clutch handle bar is assembled on the rear bridge. When the bar towards down, the car is brake. When the
bar towards up, the car can be push easily.
2.9 Charger
The charger charge the electric bottle by constant current and constant voltage( will not influence the electric