9 – Set Up “PTZ SETUP” on the TKC-100
Page 25 of 28
9-1
Set up the TKC-100 Protocol.
9-2
Go to “PTZ Setup Mode” on TKC-100. Select 1 + “SET” and hold for 2 - 3 seconds.
9-3
Use the Joy Stick to make changes. UP/DOWN Scrolls through Menu, LEFT/RIGHT
makes Entry Change. You only need to check and maybe change the Baudrate.
NOTE: The PTZ Controller must not be in the “DVR WKEY” mode. Push the
mouse button to change.
Default Password is “0000”
Address Change (1~255) - Leave at Default
001
Model Change – Leave at Default -
WDS
Protocol Change – Leave at Default -
PEL-D
B
Baudrate Change (2.4 kbps - 57.6 kbps)
Set for 2.4k
Parity Change (None/Even/Odd)
Leave at Default –
None
Prop (ON/OFF) - Proportional Speed Control
Leave at Default -
ON
SAVE SETUP DATA – Right Joy Stick to
SAVE
EXIT SETUP - Right Joy Stick to
EXIT
