Caution
List Of Items
1.1 Function Keys On Front Panel
Keyboard Specs
The LCD screen can be damaged by excessive pressure, direct sunlight, or liquids.
Joystick and keyboard should be used in environments within the temperature and
humidity range specified.
Please follow instructions defined in this manual for setup and operation.
(Esc)
Exit key: exit and back to previous menu;
(Setup)
Setup key: press and hold for 3s to setup keyboard’s parameter.
(F1)
Adjust the control speed, it has 4 level: 1, 2, 3, 4
(Preset)
Preset special status of ptz (including direction and zoom times).
This key should be used together with number key;
(
Shot)
Recall special status of ptz (including direction and zoom times).
This key should be used together with number key.
(Pattern)
Start/stop pattern record: press for 3 seconds to start pattern
record, after all operation, press this key again to stop pattern
record, this key should be used together with number key.
(Run)
Recall the stored pattern, this key should be used together with
number key.
(0) ~ (9)
Number key: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
(Auto)
Control ptz rotate in horizontal direction automatically or clear
input number: when user input some numbers, press this key
can delete the numbers, else it will control ptz rotate in horizontal
direction automatically.
(Cam)
Address selection key: select ptz address; this key should be
used together with number key.
(Tele)
Zoom in: zoom in the object, enlarge the object size.
(Wide)
Zoom out: zoom out the object, reduce the object size.
(Open)
Iris + / enlarge iris.
(Close)
Iris - / reduce iris.
(Far)
Focus+ / adjust the lens focus on distant object.
(Near)
Focus- / adjust the lens focus on near object.
(Aux on)
Aux on: turn on ptz’s aux. This key should be used together
with number key; directly press this key without keying in any
number, the controlled ptz ID will add 1.
(Aux off)
Aux off: turn off ptz’s aux. This key should be used together
with number key; directly press this key without keying in any
number, the controlled ptz ID will take away 1.
(Aux off)
Press and hold for 3s to recall number 95 preset, normally it will
be opening the menu of ptz.
1. Power adapter (Input: 100-240VAC 50/60Hz, Output: DC 12V)
2. Users Manual
1. Joystick
2. LCD screen
3. Function keys
4. Speed dome Setup
and recall keys
Item
Parameters
Power Supply
DC12V 1A ±10%
Temperature
-10°C ~ 55°C
Humidity
≤90%RH (No cream node)
Communication
RS485 Half-duplex
Baud Rate
2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Screen
128*32 LCD screen
Package Size
180 (L) x 165 (W) x 90 (H)mm
①
②
④
③
1
0
2
3
4
5
6
7
89
F1
Setu p
Esc
Prese t
Shot
Pattern
RunA
uto
Cam
A
ux on
A
ux off
O
pen
C
los e
Tele
Wide
Nea r
F
ar
2
3
