Marshall Electronics VS-7300, Руководство пользователя

Страница: 33 / 47

4. Remote Configuration
User Manual VS-7300 – V1.0 Page 33 of 47 5/2016
Event Type
Three Recording Modes are supported: Continuous , Event , and Disconnect .
Event Recording options allow event types to be selected for several events.
Selected event type is used for configuring the schedule table. Up to 4 event types
can be configured and each event type can be a combination of sensor, video loss
and motion event.
Pre-Event Time

Specify the recording duration before an event happens.
Post-Event Time

Specify the duration after the event is cleared.
Schedule Table

Actual recording mode is determined by the Schedule Table where recording
mode is configured by the day and hour.
Recording Mode options:

Record Off : No recording.

Continuous : Records continuously.

Disconnect : Recording is started when the system loses connection to the last
device (Decoder, VMS/NVR, etc). When multiple devices are used and only one is
disconnected, the others will continue to record.

Event Type : Records when Event Type configuration is applied.
Checking Recording Status
Recording status can be checked on the main view page.
Search and Playback
Recorded video and audio data can be saved as an AVI file on the disk. In general,
one AVI file is created per event recording. However, it is possible to merge a series
of recorded data to a single AVI file depending on pre/post event time settings. The
size of the file is limited to 10-200MB or 10 minutes.