14
Marshall Electronics
RS-232 Connection Method:
DB-9 Serial Connector (PC) Phoenix 3-pin Connector
Pin 3 (TXD) ........................................................... Pin 1 (RX)
Pin 2 (RXD) ........................................................... Pin 2 (TX)
Pin 5 (Ground) ...................................................... Pin 3 (Ground)
8. RS-232 pass through port Phoenix connector.
Connection Method:
Phoenix 3-pin Loop Out
Phoenix 3-pin Next Unit
Pin 1 (RX) ............................................................. Pin 2 (TX)
Pin 2 (TX) .............................................................. Pin 1 (RX)
Pin 3 (Ground) ...................................................... Pin 1 (Ground)
15
V-SG4K-HDI
/
InStallInG tHe Control applICatIon SoFtware
HDMI Matrix, Switcher or Splitter
HDMI cable
USB cable
(Or use RS232 cable
which is terminated
with Phoenix
connector
V-SG4K-HDI
Up
Enter
Down
Status
Cancel
Right
Left
HDmI Signal Generato r
V-SG4K-HDI
Up
Enter
Down
Status
Cancel
Right
Left
HDmI Signal Generato r
V-SG4K-HDI
Up
Enter
Down
Status
Cancel
Right
Left
HDmI Signal Generato r
8.Installing the Control Application software
Computer requirements:
- Recent version of Windows® operating system
- Available USB 2.0 or 3.0 port
- Optionally: Available RS-232 9-pin serial port (or USB-to-RS-232 adapter)
- CD Drive for the install disk (or copy the disk fi les to a thumb drive)
- Place the included CD in the computer
- Run the fi le “V-SG4K-HDI setup.exe”
The following screen should appear:
www.LCDracks.com
