background image

24

Aspect Ratio

Use this row to set the current Aspect Ratio mode being used on an individual screen.

Pixel-to-Pixel

Use this row to set the current state of the Pixel-to-Pixel feature of the monitor. Pressing one of the boxes under each Screen
type will either turn Pixel-to-Pixel mode OFF or ON.

Marker Config

Marker Enable

Use this row to turn the screen markers on an individual screen ON or OFF.

Center Marker

Use this row to turn the Center Marker on an individual screen ON or OFF.

16:9 Markers

Use this row to set one of several 16:9 markers available on the monitor.

Full Screen Markers

Use this row to set one of several Full Screen markers available on the monitor.

4:3 Markers

Use this row to set one of several 4:3 markers available on the monitor.

Marker Background

Use this row to set the current status of the transparency settings of the screen markers on each individual panel.

Filter Config

False Colors

Use this row to turn the False Color filter on an individual screen ON or OFF.

Mosquito Filter

Use this row to turn the Mosquito Filter on an individual screen ON or OFF.

System Config

Input Format OSD

Use this row set the Input Format OSD timeout length.

Curtain Color

Use this row to set the current Curtain Color state.

Splash Screen

Use this row to set the splash screen on each individual panel ON or OFF.

Freeze Input

Use this row to turn the freeze input function on each individual panel ON or OFF.

9

Compatible Input Formats

The following video standards are supported by the V-MD902:

Video Input

NTSC, PAL

YPbPr Input

480i, 576i/50

480p, 576p/50
720p/25, 29.97, 30, 50, 59.94, 60
1080p/23.98, 23.98sF, 24, 24sF
1080i/50, 59.94, 60

Input Modules (Type-A modules)

MD-3GSDI and MD-TC – 3G/HD/SDI Input Module with Loop-Through

525i, 625i/50

720p/25, 29.97, 30, 50, 59.94, 60
1080p/23.98, 23.98sF, 24, 24sF, 25, 29, 30
1080i/50, 59.94, 60

3G – Level A and Level B

YCbCr, YCbCr+A, RGB, RGB+A

1080p/ 60, 59.94, 50
1080p/ 30, 29.97, 25, 24, 23.98, 30sF, 29.97sF, 25sF, 24sF, 23.98sF
1080i/ 60, 59.94, 50

MD-HDSDIx2 – Two-channel HD-SDI Input Module with switched output

525i, 625i/50

720p/25, 29.97, 30, 50, 59.94, 60
1080p/23.98, 23.98sF, 24, 24sF, 25, 29, 30
1080i/50, 59.94, 60

MD-HDMIx2 – Two-channel HDMI Input Module

480p59.94, 576p/50
720p/25, 29.97, 30, 50, 59.94, 60

1080p/23.98, 23.98sF, 24, 24sF, 25, 29, 30
1080i/50, 59.94, 60

MD-DVII – DVI-I Input Module

640 x 480/ 60, 75, 85
800 x 600/ 60, 75, 85

1024 x 768/ 60, 75, 85
1280 x 1024/ 60, 75
1600 x 1200/ 60 (CVT Timing)

1920 x 1200/ 60 (CVT Timing)

Содержание V-MD185

















Отзывы: