Marshall Electronics V-MD173, Руководство по эксплуатации, Страница: 29 / 36

29
The Network Control page’s Navigator allows you to scan your network for any other Marshall Electronics Web Enabled MD
monitors. From the navigator, you can find and sort all monitors by their Host Name, IP Address or Model number. You can also
access each monitor’s Network Control page.
Press the Scan Network button once to scan your network for other MD monitors. The navigator will not detect any monitors
added to the network if the scan was performed prior to their installation.
The information field at the bottom will indicate the Host Name, IP Address and model number of the origin of the Navigator pop
up page. It will also give a count of how many monitors have been found on the network.
Info Tab
■
System
This shows the System firmware version of your monitor.
■
Power Module
This shows the Power Module firmware version of your monitor.
■
Keypad
This shows the Keypad firmware version if your monitor has a Keypad separate from the main system board.
■
Slot
This field determines the type of module present on the system as well as its firmware version. If there is no module
installed, the text will read “No Module v0.00.”